Decided that I’m not likely ever going to finish this knight as a knight and I’d rather display it as an old abandoned work in progress, so I made some scaffolding support out of laser cut scraps, and gave him a quick paint job. #Kitbash #terrain I like scaffolding.
Here is a Mek’s workshop, built from a looted mechanicus factory. Inside is a scale model of a mega gargant the Mek boss is using to guide his apprentice meks from. The walls and ceiling have been punched through to make rook as its grown. On the roof is “da bitz bin” a large tank of spare parts waiting to be pressed into use, and they have rigged a crane and Traktor beam to pull parts from it… Been back and forth on this last idea a bunch, just not sure, maybe adding some scaffolding from sprue and paint will sell it, otherwise perhaps its too complicated and doesn’t come across… #terrain #40k #ork #megagargant
Spruins I’ve got some paint on these now, just the main materials blocked out, which was pretty easy since its all going to be metal. I started with three shades of primer; grey black and white to get some variation and break up shapes while tying it all together with a bit of pre-shading. Then I sponged on a bunch of #stuartsemple silver paint, to get some reflective shine in areas, using a sponge to get some irregular patterning to it. After that I went back over it all with the #airbrush with some Vallejo black metal, to tone down the shone and hint at some burnt/oily surfaces. Next up, dirt and earth to ground it… #terrain #kitbash #weathering #necromunda #refinery
I’ve been combining bottles, sprue, laser cut scraps, 3d print supports, random curft, a bunch of resin cast greeblies and a few broken up plaster ones, and a GW set to make this refinery set. I cut a sheet of hardboard to the size of a ikea billy shelf, for the overall footprint, to ensure it will be easy to display. Then I cut that board up for each of the modular parts so that it would be configurable on the table in a variety of ways. Next steps; primer, grout, sand, and paint… #terrain #refinery #40k #necromunda
Progress on the #vault I added plaster and sand, and rigged a cast resin cog hinged up with some leftover laser cut scraps. Gave it a quick once over with paint and some flock. I’m pretty stoked with how well its come together for a basically 2 day build! #terrain #fallout #trashbash #kitbashing
I quickly brown painted the dirt/earth sections, I’m pretty happy with how these laser cut MDF scraps worked out for the framing
Then airbrushed the metal sections
Sponged in some highlights and added a bit of flock and a few drops of alcohol ink for the weathering/rust
Since I just finished reading Cryptonomicon I had to include a little joke with the vault number.
